Difference between revisions of "Dragon Lab-Cartridge version 1.0 (Rolo)"
From The Dragon Archive
(→Overview) |
(→Templates for electronic components) |
||
Line 3: | Line 3: | ||
This is the Dragon laboratory cartridge version 1.0 for Dragon 32, Dragon 64 and Tandy Color Computer. It is a PCB for experiments with the cartridge port and little hardware developments. | This is the Dragon laboratory cartridge version 1.0 for Dragon 32, Dragon 64 and Tandy Color Computer. It is a PCB for experiments with the cartridge port and little hardware developments. | ||
− | == | + | == Description == |
− | + | ||
− | There | + | The size of the PCB (including edge connector) is 8cm x 10cm.<br /> |
− | :<nowiki>- | + | The boards provide easy access to all 40 expansion port pins. |
+ | There are pads for many purposes on the board like: | ||
+ | :<nowiki>- integrated circuits (up to DIL-40, narrow and wide),</nowiki><br /> | ||
:<nowiki>- switches,</nowiki><br /> | :<nowiki>- switches,</nowiki><br /> | ||
− | :<nowiki>- jumpers</nowiki><br /> | + | :<nowiki>- jumpers,</nowiki><br /> |
− | :<nowiki>- display</nowiki><br /> | + | :<nowiki>- a display,</nowiki><br /> |
− | :<nowiki>- resistors/capacitors</nowiki><br /> | + | :<nowiki>- resistors/capacitors...,</nowiki><br /> |
− | :<nowiki>- pad arrays</nowiki><br /> | + | :<nowiki>- pad arrays,</nowiki><br /> |
− | + | :<nowiki>- +5VDC and GND</nowiki><br /> | |
+ | The connections are printed on both sides of the board with white color. Two screws (M3) and to spacers (20cm) can be mounted as stabilizing feet. | ||
== Picture == | == Picture == | ||
[[File:lab-cart.jpg|left|200px]] [[File:lab-cart-inserted.jpg|center|300px]] | [[File:lab-cart.jpg|left|200px]] [[File:lab-cart-inserted.jpg|center|300px]] |
Revision as of 21:40, 18 June 2014
Overview
This is the Dragon laboratory cartridge version 1.0 for Dragon 32, Dragon 64 and Tandy Color Computer. It is a PCB for experiments with the cartridge port and little hardware developments.
Description
The size of the PCB (including edge connector) is 8cm x 10cm.
The boards provide easy access to all 40 expansion port pins.
There are pads for many purposes on the board like:
- - integrated circuits (up to DIL-40, narrow and wide),
- - switches,
- - jumpers,
- - a display,
- - resistors/capacitors...,
- - pad arrays,
- - +5VDC and GND
The connections are printed on both sides of the board with white color. Two screws (M3) and to spacers (20cm) can be mounted as stabilizing feet.