Difference between revisions of "Dragon 32/64 Drivewire Adapter"
Line 34: | Line 34: | ||
In this case you should assume that your user is in the usergroup '''dialout''', e.g.: | In this case you should assume that your user is in the usergroup '''dialout''', e.g.: | ||
<pre> | <pre> | ||
− | $ groups | + | $ groups # Display the usergroups for the current user |
user_foo : user_foo adm tty dialout fax cdrom floppy tape sudo audio dip video plugdev netdev fuse lpadmin scanner | user_foo : user_foo adm tty dialout fax cdrom floppy tape sudo audio dip video plugdev netdev fuse lpadmin scanner | ||
</pre> | </pre> |
Revision as of 16:44, 11 November 2014
See also: Drivewire_for_dummies
Hardware
The built-in serial UART is the CP2102
Windows
Windows driver can be downloaded from the chip manufacturer: http://www.silabs.com/products/mcu/pages/usbtouartbridgevcpdrivers.aspx
Linux
some needful commands:
~ $ sudo lsusb | grep UART Bus 001 Device 002: ID 10c4:ea60 Cygnal Integrated Products, Inc. CP210x UART Bridge / myAVR mySmartUSB light $ dmesg | grep -ie cp210* [17479.466698] usb 1-1: Product: CP2102 USB to UART Bridge Controller [17479.548508] usbcore: registered new interface driver cp210x [17479.548520] usbserial: USB Serial support registered for cp210x [17479.548535] cp210x 1-1:1.0: cp210x converter detected [17480.428168] usb 1-1: cp210x converter now attached to ttyUSB0
Look at the last line, to see that the adapter is assigned to ttyUSB0. Check which groups have access to it:
$ ls -l /dev/ttyUSB0 crw-rw---- 1 root dialout 188, 0 Nov 11 13:15 /dev/ttyUSB0
In this case you should assume that your user is in the usergroup dialout, e.g.:
$ groups # Display the usergroups for the current user user_foo : user_foo adm tty dialout fax cdrom floppy tape sudo audio dip video plugdev netdev fuse lpadmin scanner
Is the group is not listed, add the user, e.g:
adduser username dialout
You have to logout and relogin!
Drivewire Server
The Drivewire Server 4 is a Java Application and can be downloaded here: https://sites.google.com/site/drivewire4/download
There exist also "DriveWire Lite": a reimplementation in C of the server side of the DriveWire 3 protocol: http://sourceforge.net/projects/dwlite/
Drivewire Server 4 usage
If you would like to use the Server under windows without installing the JRE, use this batch file for startup:
SET JDK=%~dp0\jre SET JAVA_EXE=%JDK%\bin\java.exe "%JAVA_EXE%" -XX:+UseConcMarkSweepGC -jar DW4UI.jar --backup & pause
Download a JRE and put it into divewire directory with this batch.
Just choose CoCo2 from the DriveWire Server simple config wizard.
Keep all the default selections.